Skip to content

An emulator in progress for the Centurion CPU6 based minicomputer

License

Notifications You must be signed in to change notification settings

EtchedPixels/Centurion

Repository files navigation

Centurion Emulator

An emulator the pieces we know so far of the Centurion Computer CPU-6 and the diagnostics ROM images. It's good enough to run most of the diagnostics and to pass some of the CPU self test.

The core of the processor is based upon the Eldorado Electrodata EE200, and it is from this that most of the data is pulled.

There are differences however:

  • CPU6 has an onboard DMA engine that uses instruction 2F
  • CPU6 has an MMU that uses 2E to control some functionality
  • There are MMU operations using 47 xx, 35 xx, 7E xx, 7F xx
  • CPU6 has an 0x0F operation that is not in CPU4 and seems to be some kind of syscall/return
  • CPU6 recognizes 0x76 as some kind of jump to IPL 15
  • CPU4 has some branch and other ops for a bitbang terminal. It's not known if they remain in CPU4
  • CPU6 toggles the V flag on 22 32. Unclear if this is a side effect of an invalid instruction used to test for CPU5 v CPU6 or something more

Completed

  • The known part of the instruction set
  • Extrapolated behaviour for some of the other bits
  • Framework to run the Diag board

To Finish

  • Interrupt model
  • The various mystery instructions used in the CPU test and memory test
  • V flag - seems not to agree with the EE200 manual ? try a full V rule

Compiling/Running

Prerequisites

Compiling

  • make

Running

To start the emulator, simply run ./centurion. The system will then request a boot disk information.

The first time using the emulator, you may not have any disks to run. Therefore, you may instead want to run the auxiliary diagnostics ROM like so:

./centurion -d -s 1 -S 13
AUXILIARY TESTS

01=CPU INSTRUCTION TEST
02=CPU-6 MAPPING RAM TEST
03=ROM SELF TEST

04=CMD AUX MEMORY TEST
05=CMD SEEK TEST
06=CMD READ TEST
07=FLOPPY COMMAND BUFFER TEST
08=FLOPPY SEEK TEST
09=FLOPPY READ TEST
0A=ROM SELF TEST

0B=01133 CMD AUX MEMORY TEST
0C=01133 CMD SEEK TEST
0D=01133 CMD READ TEST
0E=FINCH AUX MEMORY TEST
0F=FINCH SEEK TEST
10=FINCH READ TEST
11=ROM SELF TEST


ENTER TEST NUMBER:_

Test operating system

The test operating system is program 10 (0x0A) on the diag board. You can run it like so:

./centurion -d -s 1 -S 10

The test OS can be used as follows:

  • enter M followed by a hex address
    • pressing space will print the value at that address, and increment the address
    • entering a hex value and pressing space will replace the value at that address and increment the address
  • enter G followed by a hex address to start executing from that memory address

For more info, view the video from Usagi Electrics using the test OS.

Test Executables

Test executables from the disk dumps (filename starting with ?) can be loaded directly.

For example

./centurion \?FLEX.4.bin
Centurion Binary ?FLEX.4.bin loaded; entry at 0100

[0C][1B][1C]?FLEX - FLEXIBLE DISK DIAGNOSTIC - REVISION 1.3

T)  TOS
Z)  RTZ
E)  ERROR
F)  FORMAT
S)  SEEK TEST
R)  READ TEST
W)  WRITE TEST
M)  MEMORY TEST
P)  PASS COUNTER
A)  AUDIO CONTROL
H)  HEAD ALIGNMENT
C)  CONVERT ADDRESS
L)  RETURN TO LOADER
X)  CONTROLLER ADDRESS

ENTER TEST CODE: 

Raw binaries

Raw binaries can be loaded directly

For example:

# hellorld, modified to halt
echo "79 86 23 C8 E5 EC EC EF F2 EC E4 A1 8D 8A 00 00" | xxd -r -p - > hellorld.bin

# remember to enable diagnostic board, because hellorld uses it's print function

./centurion -d -A 0x100 -b hellorld.bin
Raw Binary hellorld.bin loaded to 0100; entry at 0100

Hellorld!
System halted at 010F

Command line

./centurion [options] [bootfile]

When supplied, bootfile will be loaded as centurion binary (default) OR raw binary

Otherwise the emulator defaults to booting the bootstrap

Options

The following options can be used when running the emulator:

  • -b bootfile is raw binary
  • -A <addr> bootfile will be loaded at offset
  • -E <addr> override entry point (only effective with a bootfile)
  • -d set the diag mode on
  • -F emulate a finch drive
  • -l <port-number> Listen for telnet on the given port number
  • -s <value> set CPU switches as a decimal value. Switch 1 is sense
  • -S <value> set diag switches as decimal value (only effective with -d)
  • -t <value> enable system trace in terminal - See below
  • -T <value> Exit after executing instructions

System trace

The system trace outputs system IO to the terminal; useful for debugging. The -t option takes a value that is a bitmask of the following:

  • 1: Memory read
  • 2: Memory write
  • 4: Registers
  • 8: CPU
  • 16: FDC
  • 32: CMD
  • 64: Parity
  • 128 : MUX
  • 256 : DSK

For example, in order to trace both memory and registers, set -t 7.

Halting the emulator

To halt the emulator, simply press Ctrl-\ (on Unix) or Ctrl-Z (on Windows), which will land you back on your terminal prompt.

About

An emulator in progress for the Centurion CPU6 based minicomputer

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published